中卡货车后驱动桥壳设计(含CAD零件图装配图)

中卡货车后驱动桥壳设计(含CAD零件图装配图)(开题报告,论文说明书11000字,CAD图4张)
摘 要
本文的主要研究对象是驱动桥壳,主要是对其进行优化设计。驱动桥壳是汽车上一个重要部件,它是车桥上承载载荷以及转矩的部件,它还需要传递各种从车轮上传过来的力,根据实际情况中需要应对的各种复杂路况,汽车会需要承受来自不同方向,大小不同的载荷,这些载荷可能会导致汽车车桥受到损伤,驱动桥壳作为保护汽车驱动桥的部件,强度以及刚度都要满足一定的要求,在设计的时候,需要设计人员进行精确而又可靠的设计。
本文的主要目的是对桥壳进行优化设计,优化设计的核心是轻量化,结合桥壳各个部分材料的屈服强度,可以初步确定桥壳的可靠性。在此基础上,再在优化模块进行优化设计,进行了轻量化设计之后,再检验桥壳的可靠性。在桥壳进行了轻量化设计之后,它的质量大大降低,并且可靠性依旧满足要求,这就可以为制造企业带来可观的价值。
驱动桥壳的轻量化设计是车桥制造领域的一个核心内容,轻量化可以降低企业的制造成本、加工难度,还能够减少加工过程中的废气以及废水的排放,既对经济有促进作用,还对环境保护做出了贡献。本文采用的技术手段是先采用力学计算,再用有限元分析软件进行应力分析,然后再进行优化设计。在经过上述一系列操作之后,建设性地解决了一部分的桥壳的优化问题,也为汽车后桥的各种零部件的优化提供的一个良好的示范。
[资料来源:Doc163.com]
关键词:驱动桥壳;力学分析;优化设计
Abstract
The main research object of this paper is the drive axle housing, focusing on its optimal design. As a key component of automobiles, the drive axle housing bears loads and transmits torque on the axle, and also transfers various forces from the wheels. In response to complex road conditions in practice, automobiles are subjected to loads of different magnitudes and directions, which may cause damage to the vehicle axle. As a protective component for the automobile drive axle, the drive axle housing must meet specific requirements in terms of strength and stiffness, requiring accurate and reliable design by engineers.
The primary purpose of this paper is to optimize the design of the axle housing, with lightweight design as the core. The reliability of the axle housing can be preliminarily determined by combining the yield strength of the materials used in its various parts. On this basis, further optimization is carried out in the optimization module, followed by a reliability verification of the axle housing after lightweight design. After the lightweight optimization, the mass of the axle housing is significantly reduced while its reliability still meets the operational requirements, which can bring considerable economic benefits to manufacturing enterprises.
[资料来源:www.doc163.com]
Lightweight design of the drive axle housing is a core issue in the field of axle manufacturing. Lightweighting can reduce production costs and processing difficulty for enterprises, as well as lower exhaust gas and wastewater emissions during processing, promoting economic development and contributing to environmental protection. The technical approach adopted in this paper is as follows: mechanical calculations are conducted first, followed by stress analysis using finite element analysis software, and finally optimal design is implemented. Through the above series of processes, part of the optimization problems of the axle housing are constructively solved, providing a good reference for the optimization of various components of automobile rear axles.
Key words:driving axle housing;Mechanical analysis;The optimization design
[资料来源:http://www.doc163.com]





[来源:http://Doc163.com]
目录
摘 要 2
Abstract 3
1 绪论 5
1.1研究目的及意义 5
1.2国内外研究现状 6
1.2.1国内研究现状 6
1.2.2国外研究现状 7
2 驱动桥的相关介绍及驱动桥壳的力学计算 9
2.1汽车驱动桥的概述 9
2.1.1汽车车桥简介 9
2.1.2驱动桥的作用及组成部分简介 9
2.1.3驱动桥桥壳的结构型式 9
2.2驱动桥壳的力学计算 9
2.2.1桥壳的静弯曲应力计算 10
2.2.2不平路面的冲击工况驱动桥壳应力计算 12
2.2.3最大牵引力工况下驱动桥壳所受应力计算 12
2.2.4最大制动力工况下的驱动桥壳应力计算 15
2.2.5最大侧向力工况下的驱动桥壳应力计算 17
2.2.6应力计算结果分析 20
2.3本章小结 20
3 驱动桥壳的优化设计 21
3.1驱动桥壳优化的进行 21
总结 23
参考文献 24
致谢 26 [资料来源:http://Doc163.com]
