基于MATLAB的电力系统故障仿真研究

基于MATLAB的电力系统故障仿真研究(论文11000字)
摘要：本文介绍了MATLAB和Simulink的基本操作以及电力系统故障分析方法。对电力系统范围内的主要故障内容搭建了体系仿真模型，并且例举说明了电力系统故障问题，尤其是各种类型的短路，其中对三相短路进行了仿真与分析。在运行和参考了这些仿真案例的情况下，对仿真的结果做了深度分析，通过对仿真结果与故障计算所得的结果比较得出结论。通过这些仿真案例验证了基于MATLAB的电力系统仿真是能够运行的，以MATLAB为基础的计算机仿真技术能够很容易的对电力系统中的各种故障进行分析与设计，并且是有着很大的前景。
关键词：MATLAB;仿真研究；故障；电力系统

Research on power system fault simulation based on MATLAB
Abstract:This paper introduces the basic operation of MATLAB and Simulink, and the power system fault analysis method. The main contents of the fault on the power system within the scope of the build system simulation model, and illustrates the power system fault problem, especially the various types of short circuit, which carried out the simulation and analysis of three-phase short circuit. In the case of running and referring to these simulation cases, the depth analysis of the simulation results is made. By comparing the simulation results with the results obtained by fault calculation, the conclusions are drawn. Through the simulation case verifies the simulation of power system based on MATLAB is able to run the analysis and design of all kinds of fault in the power system of the computer simulation technique based on MATLAB can be easily carried out, and there is a great prospect.

目  录
1 绪论    - 1 -
    1.1电力系统及故障    - 1 -
1.2论文主要工作    - 2 -
2仿真软件    - 2 -
2.1MATLAB简介    - 2 -
2.2Simulink简介    - 3 -
3电力系统故障计算的基本原理    - 4 -
3.1短路计算的基本原则和方法    - 4 -
3.2短路电流计算    - 5 -
3.2.1计算的基本步骤    - 5 -
3.2.2短路计算    - 5 -
4 电力系统故障分析计算    - 7 -
4.1算例    - 7 -
4.2三相短路系统仿真模型及各模块参数设置    - 8 -
       4.2.1三相电压电流测量模块    - 9 - [来源：http://Doc163.com]
                   4.2.2变压器模块    - 10 -
          4.2.3线路模块    - 11 -
          4.2.4三相电源模块    - 11 -
          4.2.5三相线路故障模块    - 12 -
       4.2.6并联RLC负荷模块    - 12 -
4.3仿真结果与分析    - 12 -
5 设计总结    - 16 -
参考文献    - 16 -
致谢    - 18 -